http://www.tracopower.com page 1 of 4 ac/dc power supplies top 200 series, 200 watt features highest power density in 5.0 x 3.0 footprint supplies 200 w (convection cooling!) highest effciency up to 95% operating temperature range C25c to +70c universal input 85 C 264 vac compliance with en 61000-3-2 power back immunity low leakage current protection class l and class ll 3-year product warranty t he new top-200 series ac/dc power supplies feature the highest power rating in the industry standard 3.0 x 5.0 (76.2 x 127 mm) footprint. they can supply up to 200 w output power with convection cooling over an industrial operating tem - perature range of C25c to +70c. this performance could be realized by a state of the art design providing an extremely high effciency of >90 % which eliminates the need for a dedicated power supply cooling fan. compliance with global safety and emc standards qualify these power supplies for worldwide markets. approved for class l and class ll applications, these switchers are suitable for industrial and it systems but also for consumer products. high reli - ability is provided by use of industrial quality grade components and an excellent thermal management. this product offers an interesting power supply solution for many space and cost critical applications in commercial and industrial electronic equipment. order code output power max. output voltage (fxed) output current max. top 200-112 12 vdc 16 a top 200-115 200 w 15 vdc 13 a top 200-124 24 vdc 8.3 a top 200-148 48 vdc 4.2 a models ul 60 95 0- 1 cb scheme
http://www.tracopower.com page 2 of 4 ac/dc power supplies top-200 series 200 watt input specifications input voltage C nominal 120 C 240 vac (universal input) C ac input range 85 C 264 vac with derating at low input see power derating graph 1 input frequency 47 C 63 hz input protection t4a / 250 v harmonic limits en 61000-3-2, class a zero load power consumption 3.6 w input protection t4 a internal fuses (line and neutral) recommended circuit breaker 6 a (characteristic c) or slow blow fuse. for protection class ii use two fuses (line and neutral) output specifications regulation C input and load variation 1.0 % max. ripple and noise (20mhz bandwidth) <120 mvp-p <150 mvp-p for 48 vdc models overvoltage protection 12 & 15 vdc models: >150 % of vout 24 & 48 vdc models: >125 % of vout power back immunity 12 vdc model: 16 v (18 v for 1 sec) 15 vdc model: 20 v (23 v for 1 sec) 24 vdc model: 35 v (40 v for 1 sec) 48 vdc model: 63 v (68 v for 1 sec) overload protection by current limit at 120 C 150 % iout max. short circuit protection foldback (automatic recovery) capacitive load 12 & 15 vdc models: 15000 f max. 24 vdc model: 4000 f max. 48 vdc model: 1000 f max. general specifications operating temperature C25c to +70c (convection cooling) C derating see power derating graph 2 200 160 120 80 40 0 output power [w] ambient t emperature [c] 108 115 264 200 160 120 80 40 0 output power [w] input voltage [v ac] graph 1: in respect to input voltage graph 2: in respect to ambient temperature 12 & 15 vdc models 24 & 48 vdc models 85 02 04 06 07 0 -25 power derating
http://www.tracopower.com page 3 of 4 all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. ac/dc power supplies top-200 series 200 watt general specifications humidity (non condensing) 0 C 95 % rel. h max. efficiency C vin = 115 vac 12 & 15 vdc models: 88 C 91 % 24 & 48 vdc models: 90 C 93 % C vin = 230 vac 12 & 15 vdc models: 90 C 93 % 24 & 48 vdc models: 92 C 95 % switching frequency 100 khz typ. (pulse width modulation) hold-up time 10 ms typ. start-up time C vin = 115 vac <3.0s C vin = 230 vac <2.0s remote on/off C off: comnection to secondary ground j3 pin 1 connected to secondary ground will turn the unit off. output voltage may pulse to 20% of nominal output voltage. C off: applying external current j3 pin 2 connected to an external current source of 10 ma will turn the unit off (no pulsing output) C on: open contacts j3 pin 1 & 2 open. isolation voltage C input / output 3000 vac C input / field ground 150 0 vac C output / field ground 500 vac isolation resistance (at 500 vdc) 100 mohm min. earth leakage current 500 a max. reliability, calculated mtbf at +25c acc. to iec 61709 www.tracopower.com/products/top200-mtbf.pdf safety class (for built in use only) class i, class ii prepared with second fuse electromagnetic compatibility C conducted input ri suppression en 55022, class b (conductive plane to be (emc), emissions connected to field ground) C harmonic current emissions iec/en 61000-3-2, class a electromagnets compatibility C electrostatic discharge esd iec/en 61000-4-2 (emc), immunity C rf field immunity iec/en 61000-4-3 C electrical fast transients/burst immunity iec/en 61000-4-4 C surge iec/en 61000-4-5 C conducted rf iec/en 61000-4-6 C voltage dip iec/en 61000-4-11 safety approvals and C cb test certificate for iec/en 60950-1 www.tracopower.com/products/top200-cb.pdf certificate C siq certificate (iec/en 60950-1) www.tracopower.com/products/top200-siq.pdf C csa certificate for ul/cul 60950-1 www.tracopower.com/products/top200-csa.pdf C bureau veritas for other standards www.tracopower.com/products/top200-bv.pdf environment C vibration acc. iec 60068-2-6; 3 axis, sine sweep, 10 C 55hz, 0.075 mm C shock acc. iec 60068-2-27 3 axis, 15g half sine, 11ms environmental compliance C reach www.tracopower.com/products/top200-reach.pdf C rohs rohs directive 2011/65/eu connection pin connector (molex) weight 315 g ( 8.93 oz ) installation instruction www.tracopower.com/products/top200-inst.pdf
page 4 of 4 r e v. 07/12 specifcations can be changed any time without notice. dimensions ac/dc power supplies top-200 series 200 watt pin j2 1 + vout 2 + vout 3 + vout 4 C vout 5 C vout 6 C vout j2 pin 1 ac in l 2 ac in n j1 j1: molex series 41791 mates with molex crimp terminal: 08-52-0072 and terminal housing: 09-50-3031 j2: molex series 41791 mates with molex crimp terminal: 08-52-0072 and terminal housing: 09-50-3061 j3: molex series kk mates with molex crimp terminal: 08-50-0032 and terminal housing: 22-01-2025 pe: faston mates with tab-6.3 (1/4 ) dimensions in inch, () = mm 4x ? 0.137 (3.5) ac in out 4.71 (119.5) 5.0 (127.0) 2.72 (69.1) 3.0 (76.2) 4 x metal pillars (not included) for connection to conductive plate in order to meet all emc specifications minimum height: 0.2 (5.0) , max. diameter: 0.25 (6.0) 1.34 (34.0) 0.14 (3.6) 1 j1 j2 1 on/of f j3 1 pe pin 1 contact 2 current j3 pe to connect to protective earth if used as safety class i unit j3 pin 1 connected to secondary ground will turn the unit off. output voltage may pulse to 20% of nominal output voltage. j3 pin 2 connected to an external current source of 10 ma will turn the unit off (no pulsing output) j3 pin 1 & 2 open: unit is on jenatschstrasse 1 ch-8002 zurich switzerland t el. +41 43 311 45 11 fax +41 43 311 45 45 info@traco.ch www .tracopower .com
|
